Home > U Bend Tube >

JIS G 3461 Seamless Carbon Bending Steel Tubing For Boiler / Heat Exchanger

Product Categories

TORICH INTERNATIONAL LIMITED

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

JIS G 3461 Seamless Carbon Bending Steel Tubing For Boiler / Heat Exchanger

Ask Lasest Price
Brand Name :	TORICH
Model Number :	JIS G3461
Certification :	ISO9001
Price :	Negotiation
Payment Terms :	L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability :	30000 Ton/Year
Delivery Time :	20 days

Add to Cart

Product Details
Company Profile

JIS G 3461 Seamless Carbon Bending Steel Tubing For Boiler / Heat Exchanger

JIS G 3461 Seamless Carbon Bending Steel Tubing For Boiler / Heat Exchanger

JIS G 3461 Seamless carbon Steel tubes for boiler and heat exchanger
Size range:OD 5-420mm*WT0.5-50mm
Length: 12000m below, or upon customer's requests.
Application:for boiler and heat exchanger

CHEMICAL COMPOSITION % max
Steel grade	C	Si	Mn	P	S
STB 340	0.18	0.35	0.30-0.60	0.35	0.35
STB 410	0.32	0.35	0.30-0.80	0.35	0.35
STB 510	0.25	0.35	1.00-1.50	0.35	0.35
Remark: 1. When the purchaser requires product analysis,the permissible deviation for the values given above shall be as specified in the Table in JIS G 032 for the seamless steel tube and likewise in Table 1 (as JIS G 3461)for the electric resistance welded steel tube. 2.Where required by the purchaser,Si may be designated as 0.1-0.35%

MECHANICAL PROPERTIES min
Steel grade	Tensile strength Mpa	Yeild point or proof stress Mpa	Elongation %
STB 340	340	175	35
STB 410	410	255	25
STB 510	510	295	25

Hardness
Steel grade	Rockwell hardness HRB(Mean value of three points)
STB 340	77max
STB 410	79max
STB 510	92max

Heat Treatment (Applicable till the end of 1990)
Steel Grade	Heat Treatment
Steel Grade	Hot finished seamless steel tube	Cold finished seamless steel tube	Electric resistance welded steel tube other than hot finished or cold finished steel tube	Finished electric resistance welded steel tube	Fold finished electric resistance welded steel tube
STB 340	As manufactured, as required, low temperature annealing or normalizing may be performed	low temperature annealing, normalizing or full annealing	normalizing	As manufactured, However, as required ,low temperature annealing or normalizing may be performed	normalizing
STB 410	As manufactured, However, as required, low temperature annealing or normalizing may be performed	low temperature annealing, normalizing or full annealing	normalizing	low temperature annealing	normalizing
STB 510	normalizing

Please specify the delivery condition and heat treatment requirement when sending the enquiry.
JIS G 3461 Seamless Carbon Steel U Bend Tube For Boiler / Heat Exchanger

QUALITY CONTROL

1~ Incoming Raw Material Inspection
2~ Raw Material Segregation to avoid steel grade mix-up
3~ Heating and Hammering End for Cold Drawing
4~ Cold Drawing and Cold Rolling, on line inspection
5~ Heat Treatment, +A, +SRA, +LC, +N, Q+T
6~ Straightening-Cutting to specified length-Finished Measuring Inspection
7~ Machanical Testing in own labs with Tensile Strength, Yield Strength, Elongation, Hardness, Impact, Mictrostruture etc
8~ Packing and Stocking.

100% of our steel tubes are dimensionally checked
100% of our steel tubes are visually checked to assure they have a perfect surface condition and no surface defects.
100% eddy current test and ultrosonic test to eliminate longitudinal and transversal defects.

Product Tags:


*From:	Your email address is incorrect!
*To:	TORICH INTERNATIONAL LIMITED
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!